Two-Way Remote User’s Guide Thank you. Thank you for your purchase of an MAGICAR alarm and/or remote-start system. MAGICAR alarms and remote-start systems are the most advanced systems on the market with amazing features, incomparable ease of use, and breakthrough technologies never before used in the automotive environment. Please take time to read and understand this owner's manual so that you can fully use and enjoy you new MAGICAR system.
Two-Way Remote User’s Guide 3 Two-Way Remote User’s Guide 4
Two-Way Remote User’s Guide Two-Way Remote User’s Guide Before using your Magicar system, please take some time to familiarize yourself with it. LCD Screen Remote Description Front Buttons LCD ICONS Antenna Timer Function On Color LCD Screen Back Turbo Function On Passive Function On Auto Function On Battery 1.5V (AAA) On - Siren will chirp when arming or disarming. Off- Siren will not chirp when arming or disarming.
Two-Way Remote User’s Guide Two-Way Remote User’s Guide On - Impacts to the vehicle will be ignored by the alarm. Off - Impacts to the vehicle, depending on the severity, will trigger the alarm. Valet mode is on, only the door lock function will be available. Alarm Clock On Indicates that the vehicle is currently remote-started. Ignition Control Door Lock. Used while displaying temperatures and other features. Parking lights are flashing. Doors locked/unlocked. Voltage display.
Two-Way Remote User’s Guide Two-Way Remote User’s Guide Button Functions Description F u n c t i o ns Arming(Locking)/Disarming(Unlocking) If the vehicle is remote started or turbo operated, the runtime will be extended. 2 II 0.5Sec AUX #1 Activates AUX #1 output 2Sec START/STOP If the remote start availability icon is on, this will start the remote start process If the remote start was running, this will stop the remote atart process. 3 III 0.5Sec AUX #2 Activates AUX #2 output 2Sec Trunk Trunk release.
Two-Way Remote User’s Guide Two-Way Remote User’s Guide Locking/Arming If the system is unlocked/disarmed, pressing button I for a half second will lock the doors and arm the alarm. This function will still operate even while the vehicle is remote started. The remote and vehicle will beep once. Unlocking/Disarming If the system is locked/armed, pressing button I for a half second will unlock the doors and disarm the alarm. This function will still operate even while the vehicle is remote started.
Two-Way Remote User’s Guide Two-Way Remote User’s Guide 3) RPS Display When disarming, if the RPS was triggered while the system was armed, the numbers of times it was triggered will be displayed. AUTO Mode (ON/OFF) and Pressing button for 2 sec. will turn on Auto mode. With Auto mode, the vehicle will unlock/disarm when the remote is getting closer, and lock/arm when the remote is far away. 1) Automatic door lock/unlock function starts.
Two-Way Remote User’s Guide AUX Mode Entry (ON/OFF) As you enter AUX mode, the icon will be displayed. If an auxiliary channel is not triggered within 60 sec., Aux mode will be cancelled. An auxiliary channel can be programmed for a pulsed, latched, or timed latch output. You can use them to open or close windows, turn on lights, activate heated seats, and other features. Please follow instruction.
Two-Way Remote User’s Guide Two-Way Remote User’s Guide Trunk Release 1) Extension of Remote Start Timer During the running time, if you press button I for 2 sec.“ Start-Again” will scroll across the screen once and the timer will be reset to the preset time. The trunk will be opened/unlocked, if a button III is pressed for more than 2 sec. If the alarm is on, it will disarm and unlock the doors as well. ~Beeps twice. ~Beeps three times after resetting the runtime. The remaining runtime will be reset.
Two-Way Remote User’s Guide Two-Way Remote User’s Guide Query Function Panic Mode If button IV is pressed for 0.5 sec., the remote and vehicle will respond with beeps/chirps and parking light flashes to report the status of the vehicle.
Two-Way Remote User’s Guide Valet Mode (ON/OFF) Activate Valet mode by pressing buttons I + III for 0.5 sec. at the same time. (Valet mode can also be activated with the ignition key as well, see page 36.) Valet mode will put the system to sleep and almost all functions will be disabled. Remote lock/unlock, code unlock, remote option programming, and the query function will still operate. When the system is in Valet mode, the alarm is not active, even when the doors are locked.
Two-Way Remote User’s Guide Two-Way Remote User’s Guide Passive Arming (ON/OFF) Timer Start Reservation (ON/OFF) Passive Arming, which will lock/arm the vehicle if it is disarmed, after 30sec, can be turned ON by pressing buttons II + III at the same time, it operates under the following conditions. ~Beeps once Timer start reservation is activated by pressing buttons II+ IV at the same time for 0.5 sec if timer has been set up.
Two-Way Remote User’s Guide Two-Way Remote User’s Guide Parking Timer (ON/OFF) tap twice 1) Parking Timer The Parking Timer can be used to monitor the time passed while driving or being parked. 2) Parking Timer Set-up By pressing buttons IV twice, the parking timer will be set up and the remote will beep 3) Parking Timer Display After starting the parking timer, the display will alternate between the present time (for 1 sec.) and the parking timer (for 2 sec.
Two-Way Remote User’s Guide Two-Way Remote User’s Guide 3) Turbo Time Extension Pressing button I for more than 2 sec. while the turbo timer is operating will is scrolled across the display. extend the run time, as ~Beep twice, 4 times (1:57 will be displayed when 2 minute Turbo Timer is activated) Button Hold Functions 2 sec This function prevents accidental button presses while carrying your remote. 1) Button Hold Set-up To activate the Button Hold function, press button IV for 2 sec.
Two-Way Remote User’s Guide Two-Way Remote User’s Guide Warning of vehicle battery drain If the vehicle is locked (armed) with a taillight on, the parking lights will flash once and siren will chirp 7 times One flashing light Trunk Open Sensor With this sensor installed and the alarm armed, the alarm will be triggered if the trunk is opened. The siren will be activated and the parking lights will flash.
Two-Way Remote User’s Guide Two-Way Remote User’s Guide Shock Sensor Trigger If the alarm is armed and the shock sensor is triggered by an impact to the vehicle, the following sequence will occur: ~Beeps for 9 sec CAR : The siren will activate and the parking lights will flash for 9 sec. Remote control : Vibration/theft indication sound. Remote will beep at 4 second intervals until a button is pressed.
Two-Way Remote User’s Guide Two-Way Remote User’s Guide Code Unlock Function Cold Start Functions This is the function that when the timer start reservation is on, engine will be started automatically based on fixed 3 steps of temperature setting if the temperature is below 0 , the engine will be started automatically Temperature setting can be adjusted by changing main controller option. ~Beeps CAR : The siren will activate and the parking lights will flash for 9 sec.
Two-Way Remote User’s Guide Knocking (For door open or entering the password.) The password should be entered under the, (see page 28). Push the Button or Knock on the RPS sensor 10 times Two-Way Remote User’s Guide Set-up and Other Functions In Range Display Method If the remote and vehicle are within operating range of each other, the signal strength will be displayed beside the antenna icon on the display. Red LED flashes fast Flashes 5 times The Green LED will flash at the first knock.
Two-Way Remote User’s Guide Time Information Backup 1) It saves time information (current time, start-up reservation time and alarm time) in the status where power has not been supplied to remote (at a time of replacing batteries). If the power is supplied again, users do not have to re-adjust the time information. 2) Remote default is set in the status when the time information backup is released.
Two-Way Remote User’s Guide Remote Start Reservation Mode for Manual Transmisson Vehicles Reservation Mode prevents a manual transmission vehicle from starting in gear if the system has been installed properly. Automatic(Passive) Reservation When key is turned off, the doors will unlock and the engine will remain running up to 2 minutes. Within the 2 minutes, if a door opens then closes, the engine will shut off ]” icon shall be displayed to confirm completing the remote start reservation.
Two-Way Remote User’s Guide Two-Way Remote User’s Guide Setting the Shock Sensor Sensitivity Controlling Shock Sensor Sensitivity To adjust the shock sensor sensitivity, locate the shock sensor and adjust the dial on the sensor. The higher the number on the dial, the higher the sensitivity of the sensor.
Two-Way Remote User’s Guide Function Set-up of Present time Set-up of Timer Start Reservation Time Set-up of Alarm Clock Time Set-up/cancellation of Alarm Clock Function Button Hour Minute Hour Minute Hour Application Method The icon flashes. At this time, button will control the hour, and button will control the minute. The icon, and [ ] flash At this time, button will control the hour, and button will control the minute. The [ and icon flash.
Two-Way Remote User’s Guide 45
