SDS

SAFETY DATA SHEET
Confirms to OSHA Hazard Communication Standard (CFR 29 1910.1200) HazCom 2012
Product:
Tub and Tile Refinishing Kit Spray On- 3188
Revision Date: 12-Dec-2016
Document No.: 130529-5 Page 4 of 6
Release Date: 1/10/2014
Exposure Guidelines:
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Acetone (67-64-1)
500 ppm TWA
750 ppm STEL
2400 mg/m
3
590 mg/m
3
TWA
Propane (74-98-6)
Not available
1800 mg/m
3
1800 mg/m
3
TWA
Titanium dioxide (13463-67-7)
10 mg/m
3
TWA
15 mg/m
3
(total dust)
Not available
N-butane (106-97-8)
1000 ppm STEL
Not available
1900 mg/m
3
TWA
N-butyl acetate (123-86-4)
200 ppm STEL
710 mg/m
3
950 mg/m
3
STEL
2-pentanone (107-87-9)
150 ppm STEL
700 mg/m
3
530 mg/m
3
TWA
Propylene glycol methyl ether acetate
Not available
Not available
Not available
Xylene (1330-20-7)
100 ppm TWA
435 mg/m
3
Not available
Ethylbenzene (100-41-4)
20 ppm TWA
435 mg/m
3
545 mg/m
3
STEL
Appropriate Engineering Controls
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to
conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne
levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an
acceptable level. Provide eyewash station.
Individual Protection Measures
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment.
Skin and Body Protection: For prolonged or repeated skin contact use suitable protective gloves. Wear suitable protective
clothing.
Eye/Face Protection: Wear safety glasses with side shields (or goggles).
General Work/Hygienic Practices: Observe any medical surveillance requirements. When using do not smoke. Always
observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or
smoking. Routinely wash work clothing and protective equipment to remove contaminants.
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Liquid
Odor: Not determined
Odor threshold: Not determined
pH: Not determined
Melting point/freezing point: -305.68 °F (-187.6 °C) estimated
Initial boiling point and boiling range: -43.78 °F (-42.1 °C) estimated
Flash point: -156.0 °F (-104.4 °C) estimated
Evaporation rate: Not determined
Flammability (solid, gas): Not determined
Upper/lower flammability or explosive limits: 12.8 % estimated, 1.4 % estimated
Vapor pressure: 2809.02 hPa estimated
Vapor density: Not determined
Relative density: 0.81
Solubility(ies): Not determined
Partition coefficient (n-octanol/water): Not determined
Auto-ignition temperature: 550 °F (287.78 °C) estimated
Decomposition temperature: Not determined
Viscosity: Not determined