Touchless

ManualsBrandsMAGIC SWITCH: MS11 Hardwired ManualsOtherStainless Steel

MAGIC SWITCH: MS11

75.5820.02 MS-11 20160106 Page 1 of 4

* Use of the device outside the intended application cannot be guaranteed by the manufacturer.

TECHNICAL SPECIFICATIONS

DESCRIPTION

ENGLISH

Hardwired | Stainless Steel | Touchless |

Activation Sensor

PATENT PENDING

Single Gang (shown) Double Gang Jamb Style

10MS11S 10MS11D 10MS11J

Speciﬁcations are subject to change without prior notice.

1. faceplate

2. mounting holes

3. sensor window

* Sensing Zone is dependent upon

• Size (area) of object

• Orientation of object

• Speed of object

• Environmental conditions

Technology Microwave - Doppler Radar (24.125 GHz)

Detection Mode Motion (bidirectional)

Supply Voltage 12-24 VAC/DC

Current Consumption < 2.8W

Temperature Range -22° F to 158° F

Enclosure Rating NEMA 4

Sensing Zone * 2 - 24 inches (adjustable)

Relay

1-Form C Solid State Relay

1A 30 VAC/VDC (max)

Dimensions (Overall)

[faceplate = 0.16” (T)]

Single Gang - 4.5’’ (H) × 2.75’’ (W) × 0.98” (T)

Double Gang - 4.5” (H) x 4.5” (W) x 0.98” (T)

Jamb - 4.5’’ (H) × 1.68’’ (W) × 0.98” (T)

Wire Harness Length 12 inches

Material Stainless Steel (faceplate)

Summary of content (4 pages)

PAGE 1
Hardwired | Stainless Steel | Touchless | Activation Sensor Single Gang (shown) Double Gang 10MS11S 10MS11D Jamb Style 10MS11J PATENT PENDING DESCRIPTION 2 1 3 1. faceplate 2. mounting holes 3. sensor window TECHNICAL SPECIFICATIONS Technology Microwave - Doppler Radar (24.125 GHz) Detection Mode Motion (bidirectional) Supply Voltage 12-24 VAC/DC Current Consumption < 2.
PAGE 2
PRECAUTIONS 1 The door control unit and the door cover profile must be correctly grounded. 1 Only trained and qualified personnel may install and setup the sensor. Always test the proper operation of the installation before leaving the premises. The warranty is invalid if unauthorized repairs are made or attempted by unauthorized personnel.
PAGE 3
SETTINGS & ADJUSTMENTS DETECTION ZONE - potentiometer COUNTERCLOCKWISE - decrease (2’’ minimum) CLOCKWISE - increase (24’’ maximum *) OUTPUT TIME - potentiometer COUNTERCLOCKWISE - decrease (1 s minimum) CLOCKWISE - increase (30 s maximum) BC A AUDIBLE CONTROL - 2-pin jumper ON - jumper removed (or on 1 pin) OFF - jumper over both pins OUTPUT MODE - 2-pin jumper TIMED - jumper removed (or on 1 pin) TOGGLE - jumper over both pins * Maximum Detection Zone will vary depending on size (area), orientation,
PAGE 4
FCC FCC: G9B-21019 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by BEA Incorporated could void the user’s authority to operate the equipment.