User`s manual
Table Of Contents
- 75KV_FULLNBv10.pdf
- C O N T E N T
- Chapter 1 INTRODUCTION
- 1-1 ITEM LIST CHECKUP
- 1-2 processor
- 1-3 chipset
- 1-4 memory
- 1-5 bios
- 1-6 multi-i/o function
- 1-7 form factor
- 1-8 acﾕ97 codec function
- 1-9 MISCELLANOUS
- 1-10.1 motherboard layout --- 75kv
- 1-10.2 motherboard layout --- 75kv-X
- 1-11 CHIPSET DIAGRAM
- Chapter 2 HARDWARE SETUP
- 2-1 CPU INSTALLATION
- 2-2 amd socket A (SOCKET 462) PROCESSOR
- 2-3 CPU FREQUENCY
- 2-4 jumper definitions
- 2-5 connectors
- 2-5.1 J3 AND J4
- 2-5.2 CHASSIS PANEL CONNECTOR
- 2-5.3 ATX POWER SUPPLY CONNECTOR
- 2-5.4 SECOND USB CONNECTOR
- 2-5.5 PS/2 MOUSE AND PS/2 KEYBOARD
- 2-5.6 IRQ DESCRIPTION
- 2-6 VOICE DIAGNOSIS TECHNOLOGY FOR 75KV-X
- Chapter 3 SOFTWARE SETUP
- 3-1 ABOUT SUPPORT CD
- 3-2 HARDWARE MONITOR INSTALLATION
- 3-3 VIA CHIPSET DRIVER INSTALLATION (4-IN-1 DRIVER)
- 3-4 ACﾕ97 AUDIO CODEC INSTALLATION
- Chapter 4 BIOS Setup
- 4-1 INTRODUCE THE BIOS
- 4-2 WHAT IS BIOS SETUP
- 4-3 HOW TO RUN BIOS SETUP
- 4-4 WHAT IS CMOS
- 4-5 WHAT IS POST
- 4-6 BIOS UPGRADE
- 4-6.1 BEFORE UPGRADE BIOS
- 4-6.2 UPGRADE PROCESS
- 4-7 CMOS SETUP UTILITY
- 4-8 STANDARD CMOS SETUP
- 4-9 ADVANCED BIOS FEATURES
- 4-10 ADVANCED CHIPSET FEATURES
- 4-11 INTEGRATED PERIPHERALS
- 4-12 POWER MANAGEMENT SETUP
- 4-13 PNP / PCI CONFIGURATION
- 4-14 PC HEALTH STATUS
- 4-15 FREQUENCY/VOLTAGE CONTROL
- 4-16 LOAD FAIL-SAFE DEFAULTS
- 4-17 LOAD OPTIMIZED DEFAULTS
- 4-18 SET SUPERVISOR / USER PASSWORD
- 4-19 SAVE & EXIT SETUP
- 4-20 EXIT WITHOUT SAVING
- C O N T E N T
MAGIC-PRO MP-7VIP-A
43
AGP Driving Control This item allows you to adjust the AGP driving force.
Choose Manual to key in a AGP Driving Value in the
next selection. This field is recommended to set in
Auto for avoiding any error in your system.
The choice: Manual, Auto.
OnChip USB/USB2 This should be enabled if our system has a USB in-
stalled on the system board and you wish to use it.
Even when so wquipped, if you add a higher perfor-
mance controller, you will need to disable this feature.
The choice: Enabled, Disabled.
USB Keyboard
Support
Enabled: Enable function when the USB keyboard is
being used.
Disabled (default): When the AT keyboard is being
used, choose disabled.
Video RAM Cacheable Choose Enabled or Disabled (default). When enabled,
the access to the VGA RAM addressed is cached.
AGP Aperture Size Choose 4, 8, 16, 32, 64 (default), 128 or 256 MB.
Memory mapped and graphics data structures can
reside in a Graphics Aperture. This area is like a lin-
ear buffer. BIOS will automatically report the starting
address of this buffer to the O.S.
AGP Driving Value This item allows you to adjust the AGP driving force.
The choice: Min=0000 ~ Max=00FF.
AGP Fast Write This item will enable the AGP model into fast write
mode.
K7 CLK_CTL Select Use this item to specify the clock control for ramp
rate. Select default for a defaulted time value, and
optimal for optimum time value which depends on
different CPU ratio.
The choice: Enabled, Disabled.
System BIOS
Cacheable
Choose Enabled or Disabled (default). When enabled,
the access to the system BIOS ROM addressed at
F0000H - FFFFFH is cached.