User`s manual
Appendix C
58
APPENDIX C THE USAGE OF RT2
Thermal Sensor Connector
a: Connect to RT2.
b: Connect this thermal sensor to
particular device which gener-
ates lots of heat such as Hard
Disk, VGA chip, etc. When
connected, user could observe
the temperature change from
the BIOS program.
VIA Hardware Monitor Setup
1. Make sure that the CD is in the CD-ROM.
2. There will appear a welcome window, please use the mouse to choose
Install Driver item.
(If not, that means users CD-ROM autorun function is disabled, but user
could still install the program via Windows Explorer. )
3. Choose Install VIA Chipset Driver item, then choose Install VIA
Hardware Monitor item.
4. The setup program will install Hardware Monitor software automatically.