Instructions / Assembly

2. Unroll the hook and loops and separate them on a at

surface. There will be two narrow long hook and loop strips,

and one wide shorter strip.

5. Place the middle of the mesh on the previously marked

center of the door frame. Press rmly from the center

outward to rmly secure male to female hook and loop.

Center

6. Firmly apply the mesh to the left and right vertical door

frames starting from the top down.

Pro Tip: If you nd a gap between the two panels, or if

the panels are not closing consistently, simply raise the

center of the mesh slightly to eliminate the gaps. Pinch

the center of the mesh and pull away from the hook and

loop on the door frame. Once separated, raise the

center of the mesh 1/8” as a time until magnets close on

their own or until the gaps are eliminated.

Pull up to adjust gap

Magic Mesh is a registered trademark of Allstar Innovations.

Distributed By: Allstar Innovations

Hawthorne, NY 10532

IM3

Gap on

3. Lay your Magic Mesh Screen at on the oor with the hook and

loop facing up. Note: The top of the panel will have a wider

horizontal hook and loop strip.

Hook and Loop

facing up

4. Apply the three hook and loop strips to the sewn-in hook and

loops on your magic mesh. Remove the white backing tape to

expose adhesive portion of the hook and loop.

Note:

The wider strip needs to be applied on the top of the Magic

Mesh (1). The narrower long strips need to be applied on the

vertical sides (2 and 3).

HANDS-FREE SCREEN DOOR

ELITE

10% OFF SITEWIDE - MAGICMESH.COM - USING PROMO CODE: BUGFREE10

PLEASE VISIT MAGICMESH.COM

FOR HELPFUL TIPS, INSTRUCTIONAL VIDEOS,

AND 10% OFF ADDITIONAL PRODUCTS SITEWIDE

USING PROMO CODE: BUGFREE10

PAGE 1
0% OFF SITEWIDE - MAGICMESH.COM - USING PROMO CODE: BUGFREE10 Center HANDS-FREE SCREEN DOOR ELITE 1 2 5. Place the middle of the mesh on the previously marked center of the door frame. Press firmly from the center outward to firmly secure male to female hook and loop. 6. Firmly apply the mesh to the left and right vertical door frames starting from the top down. Pull up to adjust gap 2. Unroll the hook and loops and separate them on a flat surface.
PAGE 2
Center 1 2 5. Place the middle of the mesh on the previously marked center of the door frame. Press firmly from the center outward to firmly secure male to female hook and loop. 6. Firmly apply the mesh to the left and right vertical door frames starting from the top down. Pull up to adjust gap 2. Unroll the hook and loops and separate them on a flat surface. There will be two narrow long hook and loop strips, and one wide shorter strip.