Instructions / Assembly

TOP
BOTTOM
SEWN
TOGETHER
1. Measure the opening of the main door that you use.
2. Lay your Magic Mesh
® Screen flat on the floor with the
magnets aligned in the center. If required, cut the Magic
Mesh® to size. Cut on the outer edge of the vertical cut
seam as shown above.
Determine the proper direction to install the screen:
• If your door opens IN, install on the OUTSIDE of the door frame.
• If your door opens OUT, install on the INSIDE of the door frame.
IM1
FOR MORE INFO &
HELPFUL TIPS, VISIT:
www.MagicMeshTips.com
Hands-Free Screen Door Installation Instructions
IMPORTANT: Before hanging, ensure that the surface is clean of dirt and debris.
3. Peel the adhesive backing off of the hook
and loop strips and apply to the Magic Mesh®
Screen according to FIGURE 1.
Note: Hook and loop #5 has split back strips.
Note: Be sure to place the Magic
Mesh® side with the panel with
magnets over the main door to allow
for passage.
HANDS-FREE SCREEN DOOR
DOUBLE
Hook & Loop Strips
or
A
B
Magnets
Bottom
Magnets
5
3
2
1
7
8
9
4
6
Top
Bottom
Hook & Loop
Strips
FIGURE 1
4. Peel off adhesive backing of hook
and loop strips then apply them to
the door frame one at a time with
pressure. Hold for 30 seconds.
Note: Be sure to hang the screen
high enough so that it does not
drag on the ground.
36” Doors
34” Doors
cut here
32” Doors
cut here
30” Doors
cut here