DRAFT QUICK START GUIDE ML2 Safety User Guide (Rev. 4.1.
DRAFT What’s in the Box Your Magic Leap 2 for Enterprise box contains: ● Headset ● Compute Pack ● Controller ● Enterprise Charger - 2 x 45W USB-C charger and cables for Compute Pack and Controller ● Fit Kit for Headset.
DRAFT Attach Your Compute Pack to a Pocket… Slide the Compute Pack onto a pocket until it moves past the clip. Please don’t put the Compute Pack in a pouch or pocket while in use or block the vents. The Compute Pack easily clips onto your pocket.
DRAFT … Or to the Shoulder Strap Clip the carabiners on the Shoulder Strap to the corresponding fasteners on the Compute Pack. Get comfortable by adjusting the length. Fasten the carabiners on the ends of the Shoulder Strap to the Compute Pack to hold it into place.
DRAFT Put on your Headset Gently stretch the back of your Headset headband until it comfortably fits over your head. For the best comfort and visual experience, rest the Headset around the widest part of your head. If necessary, insert required pads and nosepiece from the included Fit Kit for an individualized comfortable fit for you.
DRAFT the device. Prevent Tangling the Cords Be sure to prevent the cord from getting tangled or wrapped around the headband. The Headset cord should be clear of the headband accessory and torsion band.
DRAFT Wear Glasses? Pull the magnetic frame away from the Headset and replace it with the Prescription Insert. Order yours at Rochester Optical’s FrameofChoice.com. A correctly seated Prescription Insert.
DRAFT Turn On Your Magic Leap Press the button on the front of the Compute Pack and wait until the lights are fully illuminated. The five lights towards the top of the Compute Pack will be illuminated when fully powered.
DRAFT Identifying Buttons and Controls Review the corresponding illustrations to become familiar with the buttons and controls of your new Magic Leap 2. Identify the buttons and controls on the Magic Leap 2 Controller and Compute Pack pictured.
DRAFT Set Up Your Device Your device needs to be set up before you can use it. 1. Your Controller should be connected to your device from the factory. If it isn’t already connected, pair your Controller to the Compute Pack using the USB-C to USB-C cable. You can then follow the prompts in your device. 2. Connect to WiFi using the Settings app. a. Click on Network and internet. b. Click on Wi-Fi. c. Scroll through the list of WiFi using the touchpad and choose your preferred network. d.
DRAFT Charge, Clean, and Store Safely Charge For the best experience, make sure the device is fully charged every time you use it. Clean Make sure the device is turned off while cleaning. Remove the Forehead Pad, Nose Pad, and Lens Insert. Use a damp, but not wet, isopropyl alcohol wipe or sterile, lint-free cloth to gently clean the Headset, Compute Pack, and Controller. Use a damp, sterile, lint-free cloth to rinse and a dry one to finish. Store Safely store the device in the Carry Case or box provided.
DRAFT Keep up to date We may update this guide from time to time. For the latest version, please visit magicleap.com/start Copyright © 2018 - 2022 Magic Leap, Inc.
