Magic Leap 2 Quick Start Guide Last Revised: August 04, 2022 Version: English 1.1 01 © 2022 Magic Leap, Inc.
In the Box − − − − − − − − − − − − Headset assembled with Forehead Pad, Nose Pad and Frame Insert Compute Pack Controller 2x 45W USB-C Chargers 2x USB-C Cables for Compute Pack and Controller 2x Power plug cables Fit Kit with additional Nose Pads and Forehead Pads Use with Custom Fit App on device to customize the Headset fit Overhead Strap for Headset Shoulder Strap for Compute Pack Wrist Strap for Controller Cleaning Cloth Carry Case Box Overhead Strap Shoulder Strap Wrist Strap Fit Kit (Cleaning Clo
Headset with Fit Kit contents Frame Insert Nose Pad 4 Forehead Pad 1 Nose Pad 3 Forehead Pad 2 Nose Pad 2 Nose Pad 1 Compute Pack Cable Posts 5 LED lights Air vents Power button USB-C Port Back-half of Compute Pack Controller Touchpad Bumper Trigger Menu button Home button LED light USB-C port Wrist Strap 03
Step 1 Wear the Compute Pack Option 1: Pocket With the Power button on the outside, slide the back-half of the Compute Pack into a pocket or waistband until it’s fixed and secure. Option 2: Shoulder Strap Clip the Shoulder Strap hooks to the Compute Pack posts. Wear the strap over your shoulder, just like a messenger bag. Adjust the strap length for optimal positioning and comfort. CAUTION: Do not block the Compute Pack air vents while in use.
Step 3 Put on Headset Step 3.1 To get the best fit, remove any head or hair accessories (e.g. headbands or hair bands) that may obstruct the Headset from sitting flush around the head. Pull back firmly to remove the Frame Insert, then replace it with your Prescription Insert. Step 3.2 Optional Prescription Inserts Step 3.3 Center camera panel Before wearing, remove the clear film covers from the Headset.
CAUTION: Make sure the Cable is free and not tangled up in the back of the Headset. Step 3.6 Secure the Headset by pushing the Back Band together with both hands. Step 3.7 Optional Overhead Strap If the back of the Headset slips while wearing the device, simply add the Overhead Strap. With the velcro side of the strap facing upwards, thread both ends through the Eyelets on either side of the Headset.
Step 4 Connect the Controller To power on, press and hold the Home button until you hear the tone and see the LED light. Home button LED light Step 5 If the LED light is blue, it isn’t paired. To fix this, directly connect the Controller to the Compute Pack by using the USB-C to USB-C cable included in the box. CAUTION: Do not disconnect the Controller until you’ve fully updated and paired it with your device. Custom Fit Application Make sure you’re wearing your Headset and the device is powered on.
CAUTION: Do not remove silicon sock from plastic Nose Pad stems. For more resources to help you get started, visit: developer.magicleap.cloud care.magicleap.com For full safety and care instructions, see the Magic Leap 2 Safety Guide.
