User Guide
Laser Parameters
Labels and Label Placement
Wavelength: 850nm
Laser Power for classication: <2.45 mW
Mode of operation: Pulsed
Pulse Width: 3.49 and 4.98 nSec
Pulse Frequency: 80.32 and 60.24 MHz
Peak Power: 600mW
Illumination Cone: 59 H x 45 V
The Certication label is located on the Headset’s inner right temple. It reads as follows:
Class 1 Laser Product
EN/IEC 60825-1:2014. Complies with FDA performance standards for laser products except
for deviations pursuant to Laser Notice No. 56, dated May 8, 2019.
Note: Explanatory label does not appear on Device. Full label reproduction appears in this
Safety Guide.
The Manufacturer Identication label is located on the back of the Compute Pack clip.
Turn your Compute Pack over to see it. It reads as follows:
7500 W. Sunrise Blvd., Plantation, FL 33322, USA, Assembled in Mexico.
Note: the date of manufacture is traceable by unique serial number. The serial number and
model number are located under the rear t pad on the inside of the Headset adjustment band.
09
Class 1 Laser Product
EN/IEC 60825-1:2014
Complies with FDA performance standards for
laser products except for deviations pursuant
to Laser Notice No. 56, dated May 8, 2019
Magic Leap, Inc. FL USA Made in Mexico