Owner's Manual
Care instructions
Care. Ensure that your Magic Leap 2 is cleaned before each use. Buildup of dirt, oils, makeup,
and other debris can damage the Device and diminish your experience. In caring for your
Device, DO NOT:
− Use ammable or abrasive cleaning agents on the Device.
− Steam or autoclave the Device.
− Submerge the Device in liquids or pour cleaning liquids over, into, or on the Device.
− Spill any liquid into, or oversaturate any system seams, ports, or perimeter of the lenses.
− Use abrasive products such as paper towels.
Cleaning Instructions. To clean your Device, follow these step-by-step instructions:
Step 1 - Power Down: Ensure the Device is powered o and cooled down.
Step 2 - Remove Fit Kit accessories: Remove the Nose Pad, Forehead Pad, and lens insert,
if applicable.
Step 3 - Using a wipe from these compatible products: Super Sani Cloth or Cavi Wipes
to perform step 4.
Note: Prior to using each new wipe, squeeze the excess uid out of the wipe so that
it is damp but not dripping.
Caution: Do not spill or oversaturate any system seams, ports, or perimeter of the
lenses.
Caution: Do not use abrasive products such as paper towels.
Step 4 - Cleaning: Wipe all surfaces of the Device (including disassembled pieces and
cables) to remove any dirt, debris, or residue.
Note: Use additional wipes as needed, remember to squeeze the excess uid out of
the wipe so that it is damp but not dripping.
Step 5 - Disinfection: Using a new wipe, clean all surfaces of the Device (including
disassembled pieces and cables) and ensure the proper disinfection contact time per label
of the wipe. Use additional wipes as needed to maintain contact time. (the contact time
for both Super Sani cloths and CaviWipes is 2 minutes)
Step 6 - Rinse the Device by wiping it with an isopropyl alcohol wipe or clean sterile lint
free cloth dampened (not dripping) with isopropyl alcohol. Ensure to gently wipe over
the cameras and display lenses of the headset and cameras of the control.
Note: Gently wipe over the cameras and display lenses of the Headset and cameras
of the control.
Step 7 - Rinse the Device by wiping it with a clean, sterile, lint-free cloth dampened
(not dripping) with utility (tap) water.
Step 8 - Dry the Device by wiping it with a sterile lint free cloth
Storage. When the Device is not in use, store it in the Magic Leap Carry Case or another
storage case to minimize unintentional damage or exposure, in a room with temperatures
between -20 °C to 45 °C (-4 °F to 113 °F). Do not leave your Magic Leap 2 in direct sunlight;
direct sunlight can cause excessive heat which can damage the Device or other property. To
reduce the risk of injury, keep the fan exhaust ports and all other vents on your Compute Pack
free and clear of dust and other foreign objects. Covering the Device with materials that aect
airow may aect its performance and increase the chance of a re or damage.
Repair, Risk of Shock. Do not use the Magic Leap 2 if it is damaged or not functioning properly.
Do not attempt to open or repair any part of the Device yourself. Opening, disassembling, or
altering the Device may lead to electrical shock, and may result in personal injury or death.
Repairs should be made only by Magic Leap or its authorized service providers.
04