Installation Guide
Table Of Contents
- SINK SPECIFICATIONS
- SINGLE BOWL Farmhouse Model LAW33209R1
- FEATURED MODEL LAW33209R1 9’’ BOWL DEPTH
- NOMINAL DIMENSIONS
- PACKING LIST
- NOTE: Due to the nature of the material, models ca
- NOMINAL DIMENSIONS
- PACKING LIST
- NOTE: Due to the nature of the material, models ca
- NOMINAL DIMENSIONS
- PACKING LIST
- NOTE: Due to the nature of the material, models ca
- NOMINAL DIMENSIONS
- PACKING LIST
- NOTE: Due to the nature of the material, models ca
- NOMINAL DIMENSIONS
- PACKING LIST
- NOTE: Due to the nature of the material, models ca
- PACKING LIST
- NOMINAL DIMENSIONS
- NOTE: Due to the nature of the material, models ca
- NOMINAL DIMENSIONS
- PACKING LIST
- NOTE: Due to the nature of the material, models ca
- PACKING LIST
- NOMINAL DIMENSIONS
- NOTE: Due to the nature of the material, models ca
- PACKING LIST
- NOMINAL DIMENSIONS
- NOTE: Due to the nature of the material, models ca
- General Recommendations:
- Tools and Materials needed:
- Under mount InstallationFlush mount Installation
- Figure 4Figure 5
- Figure 6Figure 7
- 1.Prepare the sink base cabinet
- 2.Make template and cutout
- 3.Set the sink
- 4.Install the countertop
- Care and Maintenance
- Limitations
- SINGLE BOWL Farmhouse Model LAW33209R1
NOTE: Customer needs to select the flat or
grooved front and proceed accordingly.
3
SINK SPECIFICATIONS
SINGLE BOWL Farmhouse
Model LAW3020R1
FEATURED MODEL LAW3020R1
10’’ BOWL DEPTH
FEATURES
FIRECLAY
10mm radius corners
Elegant and functional drain grooves
Long-lasting, easy-to-clean, glossy
interior and matte exterior finish
Center drain placement
Reversible for flat apron front or grooved
apron front
NOMINAL DIMENSIONS
MODEL# SINK DEPTH EXTERIOR
LAW3020R1 10.04’’ 30.16’’×19.96’’
UNIT:inch
PACKING LIST
SINK
STRAINER
BOTTOM RINSE GRID
NOTE: Due to the nature of the material,
models can differ up to 5mm from the listed
dimensions. We advise that you do not cut
your countertop until your sink arrives
to measure and cut the countertop to
ensure a perfect fit.