Installation Guide

8 / 8
DO
1. Daily Use, Daily Clean ! Use soft towel to keep the sink bowl dry.
2. Clean up as soon as possible once used any chemical or corossion products.
3. The sink is brushed finish, pls wipe it along with the brushed direction
DO NOT
1. Leave water spots, utensils or steel cool-ware in the sink for a long time, which would become rust
spots on your sink surface.
2. Leave cleaning agents or bleach sitting in your sink for a long period of time which may cause the
sink discolor or damage the surface.
3. Use a steel wool or scouring pad rubbing against the direction of the grain.
4. Leave rubber mats, cleaning pads or sponges in the sink for a long time as this may ruin the finish of
your sink.
5. Use the inside of the sink as cutting surface.
How to use scouring pad correctly?
1. Get a dry and clean non- scratch scrub pad.
2. Scrub the rust off according to the direction of the grain.
General Recommendations:
STAINLESS STEEL FARMHOUSE SINKS
 Check all the matching products inside when opening the package.

Inspect your sink for any noticeable damage before installation.
 Read the installation and maintenance instruction thoroughly before installation.

Consult your cabinet dealer before custom order cabinet for the sink.

Use experienced and professional installers.
 Please be aware of that we are not responsible for any damage to countertop, sink fixture, faucet and
personal injury during installation.