Use and Care Manual

CARE AND MAINTENANCE MANUAL

· Clean every day by thoroughly rinsing with mild soap and warm water and wipe dry

with a cloth.

· Keep the tub free of any standing water as this can cause a buildup of mineral

deposit, which can affect the appearance of your sink.

· Always rinse the bathtub after using any cleaning agent and wipe dry with a cloth .

Clean any mineral deposits built up over time with a mild solution of vinegar and water

followed by thorough flushing with water.

· Use steel wool or a scouring pad as it damages the sink surface and causes discol-

oration.

· Let household cleaning agents or bleach sit in your bathtubs for a long period as this

may ruin the finish of your sink.

· Leave rubber mats ,sponges , or cleaning pads in the bathtub for long periods as this

may damage the finish of your tub.

· Use the inside of the tub as a cutting surface.

· The uneven surface --- To finish polishing a bathtub , we usually apply max to make

it shine and protect it from stains and scracthes . However , the extra wax will eventual-

ly generate an uneven Surface . Before using it , please use a clean cloth with warm

water in circular motions to lightly wipe the surface to remove the extra wax.

· The water stain --- To finish testing the bathtub overflow, we usually inspect the

bathtub overflow drains by running water down the drains to test if there is any leak at

the overflow . Therefore, water stains may be found on the surface of the bathtub.

ALWAYS

NEVER

NOTE