Use and Care Manual
AFTER INSTALLATION
6
Please allow 24 hours for the silicon to dry off before use.The installation
guide includes options for waste connection: The final decision about
installation and waste connection should be taken by a qualified person.
CARE & CLEANING
Run water into the bath and check connections for leaks.
7
Use a soft cloth or sponge for cleaning .Don not use any scouring pads like pot clean-
ers etc. as this will dull the surface
Use mild soap and water for everyday use.
Do not use any abrasive cleaning materials.
Do not use any disinfectants, aerosol cleaners, ammonia concentrates etc.
Every few months give your bath a light polish with LIBRA acrylic polish to restore the
original sheen.