Specification

I II III

I II

I:loosen the screw.

II:Adjust the upper

and lower position.

II:tighten the screw.

I:loosen the screw to keep hinge apply

force toward the direction of arrow.

II:tighten the screw to keep hinge apply

force toward the direction of arrow.

I:loosen the screw.

II:Adjust the distance between front

and back.

When the door position is not

standard,please adjust the door

according to the right picture.

Please place the cabinet on the

flat floor before adjustment.

Adjust the door up and down to match the cabinet.

Adjust the door left and right to match the cabinet for suitable crack of the door

Adjust the door backwards and forwards to match the cabinet.

Adjust door following the direction.

etp 

Page 10