Installation Guide

Installation Guide

Package Includes

Bathroom Sink Faucet x 1

Pop-up Drain Assembly x 1

Hot & Cold Water Supply Hoses

Rags

1 Insert the faucet.

The side with stick out

face up to the faucet.

2 Tighten the mounting nuts.

3 Connect and tighten the supply hoses.

Hot

Cold

4 Turn on the water supplies.Check all connections for leaks.

1/2" FIP Hose

PAGE 1
Installation Guide Package Includes Bathroom Sink Faucet x 1 Pop-up Drain Assembly x 1 Hot & Cold Water Supply Hoses 2 Tighten the mounting nuts. 1 Insert the faucet. The side with stick out face up to the faucet. 3 Connect and tighten the supply hoses. Hot 4 Turn on the water supplies.Check all connections for leaks.
PAGE 2
Installation Guide 1 Unscrew components A & B. to the seal. 1/2" FIP Hose 2 Silde the drain body(C) through the hole in the sink. Rags 3 Screw components A & B back on as shown. A B 4 Connect the rear end of the drain to the Drain Pipe. 5 Push to activate. · Please avoid using plumber's putt The seal on top is leak-free. Plumber's putty might cause damage.