Installation Guide

Table Of Contents

TOOLS

Step 1

Position Template

Check the cut-out template against the actual sink to ensure a proper sized cut-out， then

Place the cut-out template in the desired location on the countertop

: Trace Template

Trace template on countertop with a pencil (Figure 1)

: Cut Countertop

Cut the opening in the countertop by carefully following the traced line (Note: Please

use the appropriate saw that fits your coutertop material)

Safety glasses / maker / silicone adhesive sealant / tape measure / Jigsaw / rags / wood braces / level / screws /

bladed screwdriver

Step 3

Step 2