Installation Guide

ManualsBrandsMagic Home ManualsKitchen18-Gauge Stainless Steel 17 in. x 19 in. D Single Bowl Undermount Kitchen Sink

1

2

3

4

5

6

7

Table Of Contents

Undermount Kitchen Sink
- TOOLS
  - : Position Cutout Template and Trace It with Penc
    - Check the cut-out template against the actual sink
  - Step 4: Secure Sink to Countertop. Use a bead of
DO
- 1.Clean Daily. Use a soft towel to wipe the sink wit
DO NOT
- 1.Leave water spots, utensils or steel cool-ware in
  - 5.Use the inside of the sink as cutting surface.

4

/

8

Step 3

Step 2

: Cut the opening in the countertop by carefully following the traced line. Pls

use the appropriate saw that best fits your countertop material.

: Drill Hole in Countertop. Turn the countertop over and drill 3/8” diameter x 1/2”

deep hole in the countertop, mounting holes should be ½” from edge of sink. Insert

anchors into drilled holes and lightly tap with a hammer until flush.

Step 4:

Secure Sink to Countertop. Use a bead of silicone (or preferred adhesive) around

the rim of the sink/countertop underside. Check the alignment of the sink to the cutout

in the countertop. Place sink over cutout hole and press firmly.