INSTRUCTION MANUAL Model Number: MCLD24WI CLOTHES DRYER CAUTION: BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Magic Clean has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice.
TABLE OF CONTENTS Help Us Help You 3 Parts and Features 4 Important Safety Instructions 5 Installation Instructions 5 Before Using Your Dryer 5 Wall Mounting Instructions 6 Leveling Legs 7 Electrical Connection 7 Control Panel 7 Operating Your Appliance 8 Temperature Control 8 Dry Mode Selector 8 Drying Time Reference 8 Sorting Fabrics 9 Fabric Care Sheet 10 Care and Maintenance 11 Cleaning Your Appliance Exterior 11 Cleaning the Filters 11 Troubleshooting Guide 12 Serv
HELP US HELP YOU... Write down the model and serial numbers. Read this guide carefully. You'll find them on a plate located on the back wall of the appliance. It is intended to help you operate and maintain your new appliance properly. Please write these numbers here: Keep it handy to answer your questions.
PARTS AND FEATURES 4
Important Safety Instructions ~WARNING~ • • • • • • To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions: Read all instructions before using the appliance. DANGER or WARNING: Risk of child entrapment. Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous. . . even if they will “just sit in the garage a few days.
Ø Wall Mounting Instructions ** It is recommended to complete the following procedure with at least 2 people ** Tools and parts required for Plaster and or Wood Installation Tools Required Drill & Drill Bit Phillips Head Screw Driver Wood screws 2” long Wall Mounting Kit Includes the following: Description Wall Hanging Bracket Wall Hanging Hook Plastic Spacers Exhaust Pipe a) 1 1 4 2 2 2 1 Determine the position where you will be installing the mounting bracket.
Ø Adjusting the leveling legs Your dryer is shipped with the legs in the bag containing your user’s To install and adjust the leveling legs see the illustration to the right. guide. If the floor is uneven adjust the legs (do not insert pieces of wood, or any other objects under the legs) • Adjust the height level of the legs accordingly. Place the dryer on a sturdy flat surface. If the dryer is placed on an uneven or weak surface, noise or vibration will occur.
Ø OPERATING INSTRUCTIONS Ø DRY MODE SELECTOR This unit is designed with an automatic moisture sensor to monitor the moisture level of the clothes for optimistic performance. It provides you both Auto Dry and Timed Dry modes for your best drying performance. Auto Dry Mode: When the selector button is up, unit works at automatic drying mode.
Ø DRYING TIME REFERENCE ** LOAD WEIGHTS AND RESPECTIVE DRYING TIMES ARE APPROXIMATE ** Drying Capacity 3 (Three) Lbs 5 (Five) Lbs 7 (Seven) Lbs 9 (Nine) Lbs Drying Times High Heat 30 Minutes 60 Minutes Low Heat 55 Minutes 110 Minutes 120 Minutes 200 Minutes Sorting Fabrics For the best drying results, clothes should be sorted properly. Separate the lint shedders (chenille and terry cloth) from the lint collectors (synthetics, flannel and fabrics with a nap, such as velveteen and corduroy).
to such reasons as very heavy fabrics or thick seams. To dry these items, give a further 10 minutes or so in the timed program. Also do not overload the dryer. If the dryer is overloaded, its efficiency is lessened and clothes may not dry evenly. Do not over-dry When using the timed program, it is possible to over-dry fabrics, if too long a time has been set. This can cause the fabrics to wrinkle, shrink or feel harsh. Synthetic materials can also become charged with static electricity.
CARE AND MAINTENANCE Ø Cleaning the Exterior • Wipe the dryer surfaces, including the control panel, with a soft cloth and non-abrasive household detergents. • Use a soft cloth to dry the surfaces. • Do not pour water on the dryer. Ø Cleaning the Filters Unplug the power cord prior to any cleaning. Cleaning the Lint Filter: a) b) Removing the Lint Filters: Remove by pulling outward using the four (4) grip holes in the filter assembly.
PROBLEMS WITH YOUR DRYER? You can solve many common appliance problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE Timer knob will not rotate Not plugged in. The circuit breaker tripped or blown fuse. Dryer does not operate. Door is not closed. Drum does not rotate Laundry not completely dry Clean the Filter Reduce the amount of clothing loaded in the dryer.
YOUR MAGIC CLEAN PRODUCTS WARRANTY Staple your sales receipt here. Proof of original purchase date is needed to obtain service under warranty. WHAT IS COVERED – LIMITED ONE-YEAR WARRANTY Magic Clean Products warrants that the product is free from defects in materials and/or workmanship for a period of twelve (12) months from the date of purchase by the original owner.
Registration Information Thank you for purchasing this fine Magic Clean product. Please fill out this card and return it within 100 days of purchase and receive these important benefits: Ø Protect your product: We will keep the model number and date of purchase of your new Magic Clean product on file to help you refer to this information in the event of an insurance claim such as fire or theft. Ø Promote better products: We value your input.
MCLD24WI - 12032021 PRINTED IN CHINA 17
