BUILT-IN WINE & BEVERAGE COOLER WITH DUAL TEMPERATURE ZONES INSTRUCTION MANUAL Model No.: MCWBC77DZC To ensure proper use of this appliance and your safety, please read the following instructions completely before operating this appliance.
TABLE OF CONTENTS NAMES OF THE PARTS……………………………………………………… 2 SPECIFICATIONS…………………………………………………………….. 2 IMPORTANT SAFETY INSTRUCTIONS……………………………………. 3 INSTALLATION INSTRUCTIONS BEFORE USING YOUR APPLIANCE…………………………..…… 3 FREE STANDING INSTALLATION….………………….…………… 3 BUILT-IN INSTALLATION………..…………………………………… 4 ELECTRICAL CONNECTION ……………….………………………. 4 APPLIANCE FEATURE…………………………………….…………………... 5 OPERATING YOUR APPLIANCE TEMPERATURE CONTROL AND DISPLAY ………………………… 6 INDICATOR LIGHT ……………..
NAMES OF THE PARTS MODEL NO.: MCWBC77DZC 1) Interior Light 2) DC Electric Fan 3) Inner rear 4) Zone Partition 5) Control / Display Panel 6) Wire Shelf / Glass Shelf *(Shelves are available for either wine or beverage combination storage use) 7) Door Handle 8) Partition Gasket 9) Tempered Glass Door SPECIFICATIONS – Model # MCWBC77DZC Product Description Built-In Wine & Beverage Cooler With Dual Temperature Zones Model No. MCWBC77DZC Unit Dimensions ( inches ) Width Height Depth 23.4” 34.4” 24.
IMPORTANT SAFETY INSTRUCTIONS aWARNINGa • • • • • • • To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions: Read all instructions before using the wine or beverage cooler. DANGER or WARNING: Risk of child entrapment. To avoid the possibility of child entrapment, please take the following precautions before throwing out the appliance. - Remove all doors from the unit. - Leave the shelves in place so that children may not easily climb inside.
Built-In Installation The cutout dimension illustrated in figure (A) allows for door swing and access to the pull-out shelves when installed as a built-in appliance. If installing between frameless cabinets, a ½” wide filler strip or side panel may be needed on hinge side. The filler strip will act as a spacer between the appliance case and adjacent cabinet door swing. The width of the opening must include the filter panels. Note: The door should protrude at least 1” beyond the surrounding cabinets.
APPLIANCE FEATURE Two Temperature Zones • There are two zones in this appliance divided by a partition. • Each zone has its independent temperature control and display. • Each of the two zones can be used to store wine bottles or beverages. • The upper zone can hold up to 16 bottles or 63 cans. • The lower zone can hold up to 28 bottles or 77 cans. • Besides wine shelves made of steel wire, two glass shelves are supplied for your convenience to store beverages.
OPERATING YOUR APPLIANCE Temperature Control and Display 1. The temperatures in upper zone and lower zone can be independently controlled and displayed. 2. The temperature in either zone can be controlled between 39°F to 61°F (4℃ to 16℃). (The zone temperature may have a tolerance of +/-5°F (+/-3℃) from setting depending on different loading and ambient conditions.) (warmer) and (colder) near the symbol 3. The temperature display, indicator , control pads (left side) are for upper zone of the wine cooler.
Note: The temperature display can be changed between Celsius and Fahrenheit by pressing and holding both pads (warmer) and (colder) for the upper zone for approximately 3 seconds, provided the pads are unlocked and no any other setting operation is in process (Display does not flash). Interior Light (light) to switch the interior light on/off, provided the pads are unlocked You can press the pad and no any other setting operation is in process (Display does not flash).
TROUBLESHOOTING GUIDE You can solve many common appliance problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling for service. PROBLEM Appliance does not operate. POSSIBLE CAUSE Not plugged in. The circuit breaker tripped or a blown fuse. Temperature control is set too warm. Turn the control to a cooler setting and allow several hours for the temperature to stabilize.
Appliance Warranty MC Appliance Corporation warrants each new appliance to be free from defects in material and workmanship and agrees to remedy any such defect or to furnish a new part(s) (at the company’s option) for any part(s) of the unit that has failed during the warranty period. Parts and labor expenses are covered on this unit for a period of one year after the date of purchase. In addition, MC Appliance Corp.
