Installation Guide

Figure 11

2� Remove the glass cover of the light bulb holder turning

counter-clockwise� (Refer to Figure 10�)

3� Replace the old light bulb with a new oven-safe light bulb with

the following characteristics:

• Voltage: 208-240V

• Wattage: 25W

• Type: E14

4� Put the glass cover back and reconnect the oven to the main

power supply�

TRANSPORTING

WARNING: Electrical Shock Hazard

Failure to follow these instructions can result in death, fire,

or electrical shock�

1� Before moving your oven, or performing maintenance,

disconnect it from the power supply�

2� To avoid damage to the oven vent, use transpotation

that is wide enough to hold the entire bottom of the

unit� (Refer to Figure 11�)

1� Disconnect the oven from the power supply by means of the omni-polar switch used to connect the

appliance to the electrical mains, or unplug the appliance if the plug is accessible�

Figure 10