Meat Grinder User's Manual

OPERATING INSTRUCTIONS

Assembling

NOTE: Always place the unit on a firm, level, and secure place. The air passage at the bottom

and the side of the motor housing should be kept free and clear.

1. Press the fasten button and hold the

head to insert it into the inlet; the

head must be slanted.

2. Then, rotate the feeder head counter-

clockwise so that the head is secured

tightly.

3. Place the feed screw into the head

with long end first; turn slightly to

feed the screw until it is set into the

housing.

4. Place the cutting blade onto the feed

screw with the blade facing the front.

Unless the blade is fitted properly, the

meat and/or food will not grind.

5. Place the desired cutting plate on top

of the blade.

6. Support the center of the cutting plate

with a finger while securely screwing

the screw ring. Do not over tighten.

7. Place the hopper plate securely on the

head.