Installation Guide

CARE AND MAINTENANCE

Before doing any maintenance, be sure to remove the power plug from the outlet and close the tap�

WARNING:

• DO NOT use solvents to clean the unit� The washing machine can be damaged, or toxic gasses may be

produced�

• NEVER spray water on the washing machine to clean it�

• DO NOT use detergents that contain PCMX to clean the washing machine�

• Certain internal parts are intentionally not grounded and may present a risk of electric shock only during

servicing� Service Personnel – DO NOT contact the following parts while the appliance is energized: Drain

Pump, Door Lock, Drying Heater (Combo), Fan Motor (Combo)�

CLEANING AND MAINTENANCE OF WASHING MACHINE CABINET

Proper maintenance on the washing machine can extend its working life� The surface can be cleaned with

diluted non-abrasive neutral detergents when necessary� If there is any water overflow, use a cloth to wipe it off

immediately� DO NOT allow sharp items to strike the cabinet�

NOTE: DO NOT use formic acid and its diluted solvents or equivalent�

CLEANING THE INTERNAL DRUM

Any rust left inside the drum by the metal articles should be cleaned out immediately with chlorine-free detergents�

DO NOT use steel wool�

CLEAN DETERGENT BOX

1� Open Detergent box�

2� Press down the arrow and slide out assembly� (Figure 17-1)

3� Lift the clip and remove softener cover and wash all sections with water� (Figure 17-2)

4� Replace the softener cover and push the drawer back into position� (Figure 17-3)

Figure 17

Figure 17-1 Figure 17-2 Figure 17-3

CLEAN INLET FILTER

Inlet filter maybe need to be cleaned if there is insufficient or no water in when the tap is opened�

To clean the filter: