Installation Guide
15
2� Quick Wash: Select this option to wash small loads of clothing that are not very dirty quickly�
3� Delicates: Select this option for delicate fabrics such as dress shirts, nylons, etc�
• Wash cycle operates at a lower temperature�
4� Wool: Only use this option to wash wool clothing articles labeled “Machine Washable”�
• Proper detergent and water temperature must be selected for wool textiles�
• Lower spin speed and less agitation
5� Baby Wear: For washing infant clothing
6� Sanitary: Uses hot water to allow enzymes in detergent to work more efficiently for hard to clean or
heavily soiled items�
7� Cold Wash: Only uses cold water�
8� Tub Clean: Select this option to clean the wash tub� This program uses high temperatures to sterilize the tub
while removing built up detergent and residues� Add bleach for a better clean� This program should be
used at least once a month with regular use� DO NOT add any clothes or wash items for this program�
9� Normal/Cotton: Select this option for regularly used cottons and fabrics�
• Extended wash cycle with stronger intensity
• Recommended fabrics: cotton, linens, bed sheets, t-shirts, towels, jeans, etc�
10� Perm Press: Moderate strength wash cycle� Used to reduce wrinkles in clothes from washing�
11� Heavy Duty: Select this option for washing heavy clothing�
12� Bulky/Large: Select this option for bulky/large items�
• Extended wash cycle
13� Sports Wear: Select this option for sportswear�
• Wash cycle cleans heavily soiled clothes�
14� Spin Only: Select this option to spin a load separately from a regular wash cycle�
• Soap water or rinse water must be drained before spinning�
15� Drain Only: Used to drain any water in the unit�
16� Rinse & Spin: Select this option to rinse and spin a load separately from a regular wash cycle�
• This can be helpful in preventing fresh stains from setting in fabrics�
d� Time Save: Press [Time Save] to decrease the washing time�
• See Wash Cycle Parameters Table for programs that can use Time Save�
e� Delay: Press [Delay] to set a delay time for the wash to begin�
• The delay start light will flash to indicate the delay time� You can delay the start time of the cycle from
1 - 24 hours�
• Set Wash program, Press Delay to set the number of hours to delay wash cycle, then push Start/Pause�
• To cancel the delay time, press Delay button until time shows 0H�
f� Temp�: Press [Temp�] to set your desired washing temperature�
• Press button to set desired wash temp (Hot+, Hot, Warm, Eco, Cold)
g� Spin: Press [Spin] to increase spin speed�
• Washer drum spins at a speed up to 1300 RPM which reduces drying time and saves energy�
• Press the button until desired speed is lit (No Spin, Low, Med, High, Highest)�
• Some fabrics (i�e� delicates) require a slower spin speed�
• High spin speeds are not available on all cycles�










