Instructions / Assembly

20
PROBLEM
Water leaking from the door.
There might be lint accumulated on the
inner surfaces of the door and on the
surfaces of the gasket of the door.
The door opens on its own.
The condenser cleaning
warning symbol is on.
Clean the inner surfaces of the loading
door and the surfaces of the gasket of
the door.
SOLUTION
The door might not be closed properly.
Push the loading door until you hear the
closing sound.
The water discharge hose might be bent.
If connected directly to the water outlet,
check the water discharge hose.
The condenser needs cleaning.
Clean the condenser.
The lint filter needs cleaning.
Clean the filter.
The filter seat might be clogged by lint.
Clean the filter seat.
The water tank warning
symbol is on/flashing.
The water tank might be full. Empty the water tank.
The filter cleaning warning
symbol is on.
The filter seat might be clogged by lint.
Clean the filter seat.
There might be a layer that causes
obstruction on the surface of the lint
filter.
Wash the filter with lukewarm water.
The program won't start
and the filter warning light
is blinking
The condenser may not be correctly
placed.
Place the condenser correctly.
The condenser and filter may not be
placed correctly.
Clean the filter seat.
The filter and condenser warning leds
are blinking even though the filter and
condenser are placed.
Contact customer service.
The program can not be
started and both condenser
and filter warning leds are
blinking
POSSIBLE CAUSE
ERROR CODES SOLUTION
E00 Contact customer service.
E03 /
Empty the water tank. if problem persists, contact customer service.
E04 Contact customer service.
E05 Contact customer service.
E06 Contact customer service.
E08
There may be voltage fluctuation in mains.Wait until voltage is
appropriate for working range.