Instructions / Assembly

17
CARE AND MAINTENANCE
IMPORTANT: Do not use industrial chemicals to clean your dryer. Do not use a dryer that has
been cleaned with industrial chemicals.
Cleaning the Lint Filter
The lint filter should be cleaned after each use of the dryer,
or when the lint filter clean indicator light ' ' comes on.
To clean the lint filter:
NOTE: If necessary, gently rinse the filter with warm water and
allow to completely dry before placing back into the dryer.
1. Open the loading door.
2. Pull the lint filter up to remove it.
3. Pull the top of the filter apart to open it up.
4. Use your hands or a soft cloth to remove any lint.
5. Close and refit the lint filter into it's correct position.
Emptying the Water Tank
1. Pull the drawer cover and carefully
take out the tank.
2. Empty the water in the tank.
3. If there is lint accumulated on the
discharge cap in the tank, clean it
with water.
4. Replace the water tank in the dryer.
IMPORTANT: NEVER remove the water tank when the program is running.
CAUTION: The water condensed in the water tank is not suitable for human consumption.
NOTE: DO NOT forget to empty the water tank after each use or whenever the indicator ' ' is lit.
Figure Figure 8
Figure 7