4.9 Cu. Ft. Beer Keg Cooler User's Manual Model MCKC490B2/S2 PLEASE READ THIS MANUAL CAREFULLY BEFORE USING YOUR Keg Cooler AND KEEP IT FOR FUTURE REFERENCE .
Product Registration Thank you for purchasing a Magic Chef® product. The first step to protect your new product is to complete the product registration on our website: www.mcappliance.com/register. The benefits of registering your product include the following: 1. Registering your product will allow us to contact you regarding a safety notification or product update. 2. Registering your product will allow for more efficient warranty service processing when warranty service is required. 3.
TABLE OF CONTENTS NAME OF THE PARTS .............................................................................................................4 IMPORTANT SATETY INSTRUCTIONS................................................................................ 5-6 INSTALLATION INSTRUCTION BEFORE USING YOUR BEER DISPENSER .....................................................................6 INSTALLATION OF YOUR BEER DISPENSER ..............................................................
NAMES OF THE PARTS MODEL NO.
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury follow these basic precautions when using your beer keg cooler . 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) WARNING----Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. WARNING----Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
INSTALLATION INSTRUCTIONS FOR BEER KEG Keg Installation Sketch · Install the four castors with lock provided into the unit’s bottom (four screw holes pre-supplied) The two metal gaskets are usded to the front two Castors. Figure (1) before installation. Figure (II) is the final version.
Installation Of CO2 Cylinder Support Install the metal support provided onto the 4 studs located on the exterior back wall. Align the holes in the support with the studs and push down firmly. (See Figure 1) Installation Of CO2 Cylinder Install your fully charged cylinder into the support stand. Installation Of CO2 Regulator Attach the CO2 regulator to the cylinder by turning the regulator nut onto cylinder valve, making sure washer is securely inserted into connecting nut.
bottom cabinet. (See Figure 6) Grasp the keg handles and slide it all the way into the cabinet. Fig. 4 Fig. 5 Fig. 6 Installation Of The Keg Coupler Insert the keg coupler provided into the locking neck of the beer keg and turn it clockwise to lock into position, making sure the keg coupler is in the closed position. (See Figure 7) Installation Of The CO2 Air Line Hose Attach the end of the air line(red) hose provided to the hose connection on the keg coupler.
COLDER WARMER 12
CHANGING THE REVERSIBLE DOOR This Beer Dispenser has the capability of either opening the door from the left or right side. The unit is delivered to you with the door opening from the left side. Should you desire to reverse the opening direction, please follow below instructions. Caution: To avoid personal injury to yourself and/or property, we ecommend that someone assist you during the door reversal process.
CARE AND MAINTENANCE Cleaning Your Beer Dispenser Turn the temperature control to "OFF", unplug the Beer Dispenser, and remove the contents. Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. Wash the shelves and stand with a mild detergent solution. Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.
Limited Warranty MC Appliance Corporation warrants each new Compact Beer keg coolerto be free from defects in material and workmanship, and agrees to remedyany such defect or to furnish a new part(s), at the company’s option, for any part(s) of the unit that has failed during the warranty period. Parts and labor expenses are covered on this unit for a period of one year from the date of purchase. A copy of the dated sales receipt or invoice is required to receive warranty service, replacement or refund.
CNA International, Inc. d/b/a MC Appliance Corporation. All rights reserved. Magic Chef® logo is a registered trademark of CNA International, Inc. www.mcappliance.
