Owner's Manual

6
Changing the Reversible Door
Your refrigerator is built with a reversible door. You have the choice of either opening it from
the left or the right side. In order to reverse the opening direction of your door, please follow
the instructions below.
1. Remove the upper hinge cover (6)
2. Remove the two screws (1) that hold the upper hinge (5) (right side) to the frame. Remove
the upper hinge (5).
3. Lift the door and place it on a padded surface to prevent scratching.
4. Remove the two screws (8) that hold the lower hinge (2) Remove the lower hinge (2).
5. Remove the left front leg (4) and transfer it to the right side.
6. Remove the hold cover plate (7).
7. Install the lower hinge (2) onto the left side of the lower frame with the two screws through
the opposite two holes (8).
8. Set the door in its place making sure it sits on the door seat at the lower hinge (2).
9. While holding the door in the closed position secure the upper hinge (5) on the top left hand
side with the two screws (1) through the opposite two holes. Do not tighten the two screws
(1) until the top of the door is level with the top of the refrigerator.
10. Install the upper hinge cover (6) on the upper hinge.