Use and Care Manual

6
OPERATING INSTRUCTIONS
1. Allow refrigerator to stand upright for 4 hours before using.
2. Plug into a grounded outlet or appropriate extension cord (see Important
Grounding Instructions).
3. The temperature of the refrigerator can be controlled
manually , with the control dial. However, the number
shown on the knob does not directly represent the
temperature. Instead, the larger the number is, the
cooler the interior temperature will be. Change to “0"
stops the cooling but does not turn the power off. Turn
the knob to setting 4 for normal use; turn it to setting 5-7
if a cooler temperature is required or to setting 1-3 when
a warmer temperature is needed.
4. There should always be some space between food
items inside for air circulation.
5. Food should be kept in sealed containers to prevent
odors or drying.
6. Hot food should be cooled down before placing into the appliance to prevent
increase in interior temperature and power consumption. Placing food inside
too soon will impact the performance.
7. Reducing the frequency of door opening can lower power consumption.
CLEANING
Interior
Clean the interior of the appliance with a mixture of warm water and baking soda,
using about 1-2 tablespoons per quart of water. Use a sponge or soft cloth and
be sure to wring excess moisture out before cleaning around the controls.
Rinse thoroughly with warm water and dry with a clean, soft cloth.
Exterio
The exterior surface can be cleaned using warm water and a mild detergent.
Rinse thoroughly and dry with a clean, soft cloth.
Door Gasket
The door gasket must be kept clean to ensure a proper seal. Be sure to clean the
gasket frequently, using the method described above.