Use and Care Manual
9
REPLACEMENT OF INTERIOR LIGHT
Uninstall the cover and replace the light with a screwing light
(120V/10W). Refer to the illustrations and instructions below:
1. Move the lampshade 1.2~2 inches
according to arrow point direction.
2. Take out the lamp shade.
3. Rotate and take out the bulb in
counterclockwise direction.
4. Replace bulb and reinstall shade.
INSTRUCTIONS FOR DOOR CLOSER
The left door closer
The right door closer Tapping screws
1. Remove the tapping screws of the right door closer, and take out the right
door closer.
2. Install the left door closer, and fix the door closer on the door through the
tapping screws.
The door is set to open from the left side. If the door is switched to open from the
right side, then please follow the below instructions: