Owner's Manual

9
Remove right pin assemblies from the bottom
of the freezer door. On the opposite side,
attach the assemblies (located replacement pin
in the plastic Use and Care bag with the
Manual) with a screwdriver.
Note:You must re-use the screws from the pin
assemblies that are removed in this step when
attaching the new assemblies.
Place the refrigerator door on the bottom
hinge.Ensure the door is aligned horizontally
and vertically.Attach middle hinge to top (left)
of refrigerator door, align with holes and affix
to middle beam with reserved screws.
Fasten with screwdriver (not included).
Place the freezer door on the middle
hinge.Ensure that the door is aligned
horizontally and vertically,and that the
gasket seals on all sides before attaching
the top hinge.Attach the top hinge and
the hinge cover.
Step 5
Freezer
door
Insert
middle
hinge
Replace
door
Step 7
Step 6
2
2
3