Wine Cooler Model No. EWWC16MCG EWWC30MCG Wine Cooler . . . . . . . . . Before Putting Into Use . . . . . . . . . . . . . . . . . Important . . . . . . . . . . . . . . . . . . . . . . . . Placing and Installation . . . . . . . . . . . . . . . . . Description of the Appliance . . . . . . . . . . . . . . . Temperature Control . . . . . . . . . . . . . . . . . . . Maintenance and Cleaning . . . . . . . . . . . . . . . . Trouble Shooting Guide . . . . . . . . . . . . . . . . . Changing The Reversible Door .
Wine Cooler Thank you for buying this appliance. We hope it will successfully serve your requirements for many years. SAVE THESE INSTRUCTIONS Before Putting Into Use . . . . . . . . . . . . . 2 To Assemble Door Handle Instructions for Use Tips for Energy Savings Important . . . . . . . . . . . . . . . . . . . . . 3 Disposing of Worn Out Appliances Placing and Installation . . . . . . . . . . . . .
Before Putting Into Use To Assemble Door Handle (Door handle assembling for EWWC16MCG & EWWC30MCG ) To save shipping space and avoid damage of the unit during transportation, the door handle of this unit is shipped unassembled. Before putting the unit into use you are kindly asked to assemble the door handle as follows: . Locate the door handle and 2 screws attached inside the cabinet, and prepare an appropriate screwdriver. .
Important If you have bought this appliance to replace an old one equipped with a door lock that cannot be opened from the inside (lock, bolt), make sure that the lock is removed, disabled or destroyed before discarding. This will make it impossible for children to accidentally lock themselves inside the appliance and suffocate. To avoid risk of child entrapment, leave the shelves in place so children can not easily climb inside even when the appliance is in routine use or not in use at home.
Placing and Installation CHOOSING THE RIGHT PLACE WARNING Place the appliance in a dry and regularly ventilated room. Never place the appliance near heat emitting devices (e.g. cooking appliances, radiators, water heaters or similar devices) and do not expose to direct sunlight. Instructions to avoid to the risk of fire , electric shock , or injury to persons. WIRING INSTRUCTIONS The appliance should be positioned at least 2in. away from electric or gas cooking appliances and at least 12in.
Description of the appliance (A) Adjustable Wine Shelves (For EWWC16MCG only) Shelves can be optionally placed on the guides inside the appliance where appropriate. Perishable items should be stored towards the back/rear of the shelves. i.e. the coldest part of the shelf. (B) Defrost Water Outlet The interior of the appliance is cooled with a cooling plate mounted in the rear wall. Under the plate there is a channel and an outlet for defrost water.
CONTROL KNOB Fig A (EWWC16MCG) Fig B (EWWC30MCG) . Changes in ambient room temperature will affect the internal temperatures (choose correct setting of the thermostat knob). . In STOP (0) position the appliance does not operate (cooling system is switched off ), yet power supply is not interrupted. . Temperature in the appliance also depends on how often the door is opened. ILLUSTRATION OF THE APPLIANCE 1. THERMOSTAT DIAL: For controlling the temperature inside the wine cooler.
Maintenance and Cleaning Automatic Defrosting of the Appliance Switch Off the Appliance When Not In Use There is no need to defrost the cooler , because ice depositing on the inner back wall is defrosted automatically. Ice build-up on the inner back wall during the compressor operation will defrost automatically (when the compressor has cycled off) .
Trouble-Shooting Guide . Sometimes you may come across minor problems Ice Formation on the Inner Rear that in most cases do not require a service call Wall and can be easily eliminated. The problem may As long as the defrost water runs to the have resulted from improper handling and / or channel and through the outlet to the drain installation of the appliance.
Changing The Reversible Door CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you during the door reversal process. 1. Remove the top hinge assembly and keep them for future use. 2. Remove the bottom hinge assembly and keep them for later use. 3. Remove the plug buttons from the upper left holes and transfer them to the uncovered holes at the right side. Be sure to press the plug buttons firmly into the holes. 4.
Changing The Reversible Door CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you during the door reversal process. 1. Remove the top hinge assembly and keep them for future use. 2. Remove the bottom hinge assembly and keep them for later use. 3. Remove the plug buttons from the upper left holes and transfer them to the uncovered holes at the right side. Be sure to press the plug buttons firmly into the holes. 4.
Wine Cooler Warranty MC Appliance Corp. warrants each new Wine Cooler to be free from defects in material and workmanship and agrees to remedy any such defect or to furnish a new part(s) (at the company’s option) for any part(s) of the unit that has failed during the warranty period. Parts and labor expenses are covered on this unit for a period of one year after the date of purchase. In addition MC Appliance Corp.
