Use and Care Manual

2120
4 Twist the Lid back onto
the Cup.
3 Twist o the Lid and add
your ingredients.
warning! For best performance,
do not exceed the MAX line,
do not overfill, and use
sucient liquid ingredients.
warning! Do not blend for
longer than one minute to
avoid excessive heat and
pressure build-up. For
repeat cycle, carefully open
the container to release any
built-up pressure before
blending again.
2 Place the magic bullet
®
Portable Blender on a
clean, dry, and level surface.
1 Clean Blending Cups
with hot, soapy water
before use.
Direction #1
Direction #3
Direction #4
✓
x
Direction #4
ml
✓
100
200
4
Direction #2
Direction #5
Direction #7
Direction #8
Direction #6
note: You can also clean your
blender by adding cold water and
a drop of soap to the Cup and
blending for one cycle.
7 Once blending is complete,
flip the latch down to unlock
the Lid Latch.
8 Press the button on the
Lid to open and reveal
the spout. Enjoy!
note:
Make sure the Lid Latch is
upright in the locked position.
note: Ensure the Cup is positioned
properly by aligning the two dots
located on the Cup and Motor Base.
6 Once your blender is awake,
press the Power button
again to start a 20-second
blend cycle.
5 Wake up your blender by
pressing the Power button
once. Wait about 1 second
for the light animation
to complete.
note: After 2 minutes of inactivity,
your blender will automatically go
into Sleep Mode. This prevents
accidental blends and preserves
battery life.
If you want to Pulse your
ingredients or stop your
blend cycle early, press the
Power button again to stop.
using the
magic bullet
®
Portable Blender.
Direction #8