User guide

Front Panel User Interface
INSTALLATION AND USER GUIDE 29
Front Panel User Interface
TheCOREmodulefront‐panelisequippedwithasimplifiedLEDandpushbuttoninterface.TheLEDindicators
inparticularservemultiplefunctions.


EDID Management Functions
VG‐TX2:
WhenyoupressbuttonF1,theA,BandC(VID,PWR,AUXrespectively)indicatorLEDswillchangecolorto
displaytheEDIDstatus:
A B C
(VID) (PWR) (AUX)

Green Off Off: TheEDIDpresentedtothesourceisthefactorydefaultEDID.  
Thisisthedefaultbehavior
Off Green Off: TheEDIDpresentedtothesourceisthestored/programmedEDID.
Ifthereisnovalidstored/programmedEDIDthenthefactorydefaultEDIDisused.
Off Off
Green: TheEDIDpresentedtothesourceistheEDIDofthelocaldisplay,
Ifthereisnolocaldisplaythenthestored/programmedEDIDisused,
Ifthereisnovalidstored/programmedEDIDthenthefactorydefaultEDIDisused.
ChangetheEDIDmode:

a) Press&holdbuttonF1for5seconds(untilLEDsflash[Green‐Green‐Green])thenreleasebuttonF1.
b) PressbuttonF1repeatedlyuntilLEDsshowthedesiredmode.
c) Thelastdisplayedmodewillbesetafter5seconds.LEDswillthenreturntotheirnormalbehavior,
see
Table13insection5.6.





Recessed
F1 butto
n
Recessed
F2 butto
n
Status
LEDs