User guide

Installation
INSTALLATION AND USER GUIDE 27
Rear Panel
ThefollowingdescribesthebehavioroftheLEDstatusindicatorontherearoftheVoyagertransmitterand
receiverCOREmodules:

Table14.VoyagerTransmitter&ReceiverRear‐panelstatusLEDs
LED Description
OPTICAL‐1(TX)
and
OPTICAL‐2(TX)
Off:NoSFPmoduleisinstalled.
Fast‐Flash:ThereisaninternalfaultintheSFPmodule.
Slow‐Flash:SFPmoduleisfunctional,butnodataatallisbeingtransmitted.
On=SFPistransmittingvideodata,nomanagementdata.
On+Blink
=SFPistransmittingvideoandmanagementdata.
Off+Blink=SFPistransmittingonlymanagementdata.
OPTICAL‐1(RX)
and
OPTICAL‐2(RX)
Off:NoSFPmoduleisinstalled.
Fast‐Flash:Notconnectedtoaworkingtransmitter,fiberisbroken/disconnected,orthereis
aninternalfaultintheSFPmodule.
Slow‐Flash:SFPmoduleisfunctionalandconnectedtoaworkingtransmitter,butnodata
isbeing
received.
On=SFPisreceivingvideodata,nomanagementdata.
On+Blink=SFPisreceivingvideoandmanagementdata.
Off+Blink=SFPisreceivingonlymanagementdata.

Note:TheOptical‐portstatusLEDsareGreen(notbi‐color).
