Setup guide

27
.
25
Appendix I. Setting Sync Mode
The XRTx has the capability for fixed and agile sync. The default sync mode setting is
for agile sync which replicates the source sync polarity signals. However some displays
require a fixed sync polarity that is not possible to change at the video source.
NOTE: Both transmitter and receiver must have the same settings.
Not all Magenta MultiView transmitter/receivers support this
function. In this case Agile Sync Mode must be used. Contact
Magenta technical support for help.
Jumper Setting
SW5
Fixed Sync 1 N/A
2 ON
Agile Sync (default) 1 N/A
2 Off
APPENDIX I: Setting Sync Mode