Setup guide

10
MAGENTA MULTIVIEW™ SERIES
Figure 3-4. Receiver connections on the AK600 232
3.3.4 CONNECTIONS ON THE VGA/AUDIO T4/T5 TRANSMITTERS
The T4 four-port transmitter is used when the same signal is distributed
to multiple display devices. You set it up and cable it the same as you would with
the single-port transmitter. Figure 3-5 shows how connections are made on the
audio version, and Figure 3-6 shows how connections are made on the serial RS-232
T4S version.
NOTE
Serial communication mode is unidirectionally broadcast when using T4, T5
transmitters and daisy-chained receivers. In this mode, all other devices must be
of the simplex serial type. For more information, contact Technical Support.
Figure 3-5. T4 transmitter
connections with audio
Figure 3-6. T4 transmitter
connections with serial
8