Setup guide

MAGENTA MULTIVIEW™ SERIES
6
3.2.3 CONNECTIONS ON THE VIDEO / SERIAL TRANSMITTER
The single-port units with audio support video and serial signals over CAT5 cable. The
serial signal is 3 wire TX, RX, GND serial. Figure 3-3 shows the MultiView™ Series UTx
transmitter with serial Transmitter connections, and Figure 3-4 shows the MultiView™
500S serial receiver connections. See Appendix A for cable pinouts of the 500S.
Figure 3-3. Connections on the UTx Universal Transmitter.
(NOTE: Both serial connection types are shown, but only one is used depending on
model and settings).
Figure 3-4. Connections on the MultiView 500S.