Setup guide

20
MAGENTA MULTIVIEW™ SERIES
18
Appendix D. Setting Sync Mode
The AK600 has the capability for fixed and agile sync. The default sync mode setting is
for agile sync which replicates the source sync polarity signals. However some displays
require a fixed sync polarity that is not possible to change at the video source.
1080P signals may also require this mode if the sync is a very narrow pulse.
The following details jumper settings to change the sync polarity of the horizontal and
vertical sync signals (Note that jumpers JP6 and JP7 have no affect in agile mode):
Sync Mode jumpers
JP5, JP6, JP7
Jumper Setting JP5 JP6 JP7
Fixed Sync IN - -
Agile Sync (default) OUT - -
Horizontal Sync
Positive
-
IN
-
Horizontal Sync
Negative
- OUT -
Vertical Sync
Positive
- - IN
Vertical Sync
Negative
- - OUT