User guide

Product Overview
MultiView™ II DVI-Tx Installation and User Guide 5
Chapter 3 Product Overview
The MVII-DVI-Tx is a video transmitter that is compatible with the MVII-DVI-Rx-1K receiver, and many legacy
MultiView products – contact Technical Support with compatibility questions. It extends a digital video signal
over standard twisted-pair “FTP” type cable. There are user-configurable settings for video, audio, and serial
options which can be controlled from the front panel.
The MVII-DVI-Tx supports a wide range of video refresh rates and resolutions (refer to Appendix-A).
3.1 Front Panel Interfaces
The front panel of the MVII-DVI-Tx has the following controls and indicators:
There are two buttons (CFG and SEL) and several LED status indicators. All are used to display and control
the operating modes of the transmitter. The CFG indicator shows these modes:
 In normal mode, the CFG indicator is off.
 In configuration mode, the CFG indicator will be on.
Power-on
indicator
CFG
button
Config/status
LEDs
Figure 1: MVII-DVI-Tx Front Panel Interfaces
DB9 serial port
(optional, on
SAP model only)
SEL
button
CFG
indicator
Active-video
indicator
Auxiliary
signals
DC power
input port