Operating Guide

User Guide

Connecting Your Triton GPS Receiver to Your PC

Before connecting to your PC, perform the following steps on your Triton GPS:

In Triton GPS

1. Press the MENU button on the GPS

2. Select VIEW on the Menu

3. Select SETTINGS in the “View” window

4. In the “Settings” window on the GPS, select CONNECTIVITY

5. Select VantagePoint from the drop-down screen

6. Connect USB Cable from Triton to PC

Note: You should have an appropriate PC driver installed for Triton connection on PC when installing

VantagePoint. Triton CD-ROM includes the PC driver for you to update if necessary.

On PC

1. Run VantagePoint on your PC

2. In VantagePoint, click on My GPS on the Left Panel

My GPS Left Panel

Set your Triton GPS to VantagePoint connectivity mode (in Triton, press View > Settings > Connectivity,

and select VantagePoint in drop-down menu) for VantagePoint to communicate with your Triton device.

Click My GPS section at the bottom of Left Panel. When the connection is setup, your Triton device

information will display on left panel.

013900000069

1.01

Unit

Model: Magellan® Triton 300

Serial No.: 013900000069

Hardware

Device Memory Size: 1936 Mb

Software

Software version: 1.01