Owner's Manual

5.
Get
a
GPS
Signal.
1. Swipe down
from
the
top
right
corner
of
the
screen.
2.
Tap
Settings>
scroll
down
to
Location access.
3. Make sure
Access to
my
location
is
turned
ON.
4.
Make sure
GPS
satellites
is checked.
6. Mount the TRX7
In
Your Vehicle.
1.
Find a location
with
a
clear
view
of
the sky.
2. Clean the area
on
the
windshield
where you
want
to
mount
the device.
Allow
the surface to
dry
.
3. Screw the
mount
baseplate on the cradle.
4. Attach the device onto the
mount.
5.
Attach the
mount
to
the
vehicle
.*
6.
Plug
the device into
your
Vehicle
Power
Outlet using
the Vehicle
Power
Adapter
supplied
with
your
TRX7.
Please use only the supplied
VPA.
*RAM suction and
U-Bolt
mounts
both require
additional
assembly.
Note:
Go
to
trxsupport.magellangps.com
for
articles
and videos about setting up and operating
your
TRX7,
and get in touch
with
our
Magellan
TRX
Support
team via
email
at
trxsupporttamagellangps.com.
c:E:)
-
•
ca
•
l
····
...
~
ca
•
..
.-:::;;
-
...
~
~
;
-
'g
Important
------------
.....
Various fact
ors
influence
GPS
signal reception and
there are some
tips
you
can follow to improve the si gnal
reception and
time
it takes to calculate the
current
location.
•
Leave any enclosed
structure,
[garage, parking
structures,
etc.l.
• Make sure you have a
'clear
view
of
the
sky'.
Buildings
and trees can have an
impact
on
GPS
signal
reception.
•
Be sure
that
the device is
mounted
where it can have a
clear
line of
sight
to the windshield.
Note:
The
f1rs
t
time
the
dev1ce
calculates
its
location can
take
up
to
1
minute.
Subsequent
t1mes
will
be
15
seconds on average.