Owner's Manual

Get Started.
6. Mount the TRX7 in Your Vehicle.
1. Clean the area on the windshield where you want to mount the device. Allow the
surface to dry.
2. Attach the mount baseplate to the cradle with the included screws.
3. Attach the mount to the vehicle.*
4. Plug the device into your Vehicle Power Outlet using the Vehicle Power Adapter
(VPA) supplied with your TRX7.**
*RAM windshield and U-Bolt mounts both require additional assembly.
** Please use ONLY the Magellan-supplied VPA, AC Adapter, and power cradle with your TRX7. Using aftermarket or 3rd
party power adapters may result in insufficient charging or damage to the battery.
Note: Go to trxsupport.magellangps.com for articles and videos about setting up and operating your TRX7, and get in
touch with our Magellan TRX Support team via email at [e-mail] or by calling 877-255-4161.
1
2
3
4
13