Installation manual

Overview Page 5
Chapter 1: Overview
Description
The RTX3 is a 2-way, 32 zone
wireless expansion module which
enables Imperial, DGP/EVO, Spectra
SP Series or Esprit control panels to
support wireless hardware such as
motion detectors and remote controls.
Features
• Up to 32 wireless zones
• Support for REM1 / REM2 / REM3
/ REM15 / RAC1 / RAC2 remote
controls
• Support for wireless PGMs (EVO /
SP Series only)
• Support for all Magellan
transmitters including 2WPGM
• Support for two RPT1 and eight
K32RF / K37 (SP Series only)
• Support for SR150 Wireless Siren
and RPT1 Wireless Repeater
(SP Series only)
• Support for PX8 Output Module
• In-field firmware upgradeable
through WinLoad via serial
or 4-wire connection
• RF jamming supervision
• Low battery, tamper and check-in
supervision
• Transmitter signal strength display
• 3 PGM outputs and 1 optional
output (not available on Imperial
panels)
• Noise level test and indicator
Included Items:
• 2 antennas
Required/Optional Items:
• Mounting hardware
• Optional 12Vdc external power
supply (PS27D / PS17)
Compatibility:
• Imperial V32 panels
• EVO / DGP panels
• Spectra SP Series panels
• Esprit panels