Installation manual

Page 12 Programming
RTX3 PGM Options for EVO
[901] to
[908]
Assign 2WPGMs [901] = PGM 1
[908] = PGM 8
Enter 6-digit serial number or press
and release the transmitter’s
tamper switch. To delete an
assigned 2WPGM, enter 000000
as a serial number. If a section
between [901] to [904] is empty, the
RTX3 will use the on-board PGM.
[910] to
[989]
PGM programming Program the Two-Way PGM
activation event, deactivation event
and PGM Delay options. Refer to
RTX3 PGM Options for EVO.
[991] View two-way PGM tamper
trouble
PGM # in trouble will be displayed
[992] View two-way PGM supervision
trouble
PGM # in trouble will be displayed
PGM Activation
PGM Number Event Group Feature
Group
Start # End #
PGM1 [910] [911] [912] [913]
PGM2 [920] [921] [922] [923]
PGM3 [930] [931] [932] [933]
PGM4 [940] [941] [942] [943]
PGM5 [950] [951] [952] [953]
PGM6 [960] [961] [962] [963]
PGM7 [970] [971] [972] [973]
PGM8 [980] [981] [982] [983]
Default Data 000 000 000 000
NOTE: For a complete list of events, refer to the PGM programming section of
your DGP/EVO control panel’s Programming Guide.
Section Feature Details