User Manual

RM9416 User Manual Page 26
3. Tap each enabled button. (Red Light
Cameras, etc.)
4. Each type of alert can be set to enable
or disable Audio Alert, Visual Alert, and
Show on Map.
5. Tap the back arrow to return to the
Phantom Alerts screen.
Premium phantomALERTS may be purchased
from www.magellangps.com/shop.
6. Tap the back arrow to return to the
Settings screen.
Time Zone and Time Format
Selecting the Time Zone
1. Access the System Settings menu (above).
2. Tap Time Zone.
3. Check Auto or select your time zone from
one of the cities in the list.
4. Tap the back arrow.
Setting the Time Format
1. Access the System Settings menu (above).
2. Tap Time Format.
3. Tap on 24 Hours or 12 hours with am/pm.
4. Tap the back arrow.
Keyboard
Setting the Keyboard Layout.
1. From the Main Menu screen, tap the
Settings icon.
2. Tap Keyboard.
3. Select QWERTY (default) or ABC keyboard
layouts.
Units of Measure
Selecting Units of Measure
1. Access the System Settings menu (above).
2. Tap Units.
3. Tap on the desired unit of measure.
4. Tap the back arrow.
Regions
1. From the Main Menu screen, tap the
Settings icon.
2. Tap Region.
3. Select an available map that is installed in
your receiver.
GPS
Setting the GPS Position
If the Magellan RoadMate receiver is
transported over 800 km/500 mi while turned
off, it may take a long time to find satellites
and establish its location. Setting the GPS
position will allow the Magellan RoadMate
receiver to compute which satellites are
available and calculate the position more
quickly.
1. From the Main Menu screen, tap the
Settings icon.
2. Tap GPS.
3. Tap Set GPS Position.
4. Enter an address as if you were selecting
a destination.
Viewing the GPS Status
1. Tap the satellite signal indicator in the
upper right corner of the Main Menu
screen to access the GPS Status screen
2. You can also access the GPS Status
screen from Settings > GPS > Status.
Default System Settings
Restoring All Default System Settings
1. Access the System Settings menu (above).
2. Tap Restore Default.
3. Confirm that you want to proceed in
restoring all the system defaults.
Product Information
Viewing Product Information
1. From the Main Menu screen, tap the
Settings icon.
2. Tap Product Information.
3. (Note: Scroll down the page to view the
Serial Number and Software Version.)
In Case of Trouble
The receiver does not have a reset button.