Specifications

49
Configuring the Rover in Direct IP mode
1. Turn on the ProMark3 RTK.
2. Double-tap the DGPS Configuration icon.
3. Tap the Select Mode button.
4. Select Direct IP and then tap OK. This gives access to the
Direct IP settings window from which you can now do the
following:
a) Establish a Bluetooth connection with your cell phone.
b) Establish an Internet connection via the cell phone.
c) Enter the IP address from which corrections can be
obtained.
5. Establish a wireless connection between the cell phone
and the ProMark3 RTK as explained in Step 5. on
page 46.
6. Establish a GPRS connection to the Internet via the cell
phone as explained in Step
6. on page 47.
7. To enter the IP address of the corrections provider:
• Tap on the Direct IP Settings window. The Direct IP Con-
nection window opens in which you can store several Direct
IP configurations.
• To enter your first Direct IP configuration, with New selected
in the Direct IP Configuration field, tap on the Add button
and then enter the following parameters:
- Name: Direct IP configuration name (choose a name at
your convenience)
- Host: Host IP address
- Port: Port number
•Tap OK. The name of the configuration you have just created
is now pre-selected in the Direct IP Configuration field. Tap
OK again. This takes you back to the Direct IP Settings win-
dow (see example opposite).
•Tap OK. This takes you back to the DGPS Configuration win-
dow. On top of the screen, you can read part of the settings
you have just made.
•Tap the Connect button. The DGPS Configuration screen now
indicates the amount of incoming data packets (bottom of the
screen) as well as the status of the DGPS mode (top of the
screen).
•Tap OK to close the DGPS Configuration window. The follow-
ing two messages are displayed successively: “
Please wait...”
and “
Processing incoming data packets...”.
•Tap OK to close the message window.
For step 7, you need to
know your Direct IP con-
nection profile (host IP
address and port number).
Please contact your Direct
IP provider if you don’t
know these parameters.