Specifications

45
Rover-Only Configuration (Network)
Two types of connections are possible: NTRIP and Direct IP.
Both rely on the use of a Bluetooth-enabled, GPRS-enabled
cell phone within range of the ProMark3 RTK.
No user-owned base needs to be deployed in this configura-
tion.
The “Rover-Only” Configuration requires that you establish a
Bluetooth link to your cell phone and then a GPRS connection
from the ProMark3 RTK via the Bluetooth link and the cell
phone. Although this connection phase is accurately de
-
scribed in this section, you can also refer to Step-by-Step Pro-
cedure for Establishing a GPRS Connection Via Bluetooth on
page 198. For more information about Bluetooth, you can also
refer to Bluetooth Manager Module on page 190.
Setting Up the Rover
Install the unit on its range pole:
1. Mount the GNSS antenna on the pole
2. Attach the field bracket onto the pole
3. Place the ProMark3 receiver into the field
bracket
4. Connect the GNSS antenna to the unit
using the cable provided.
5. Measure the antenna height.
1.
4.
3.
2.