Specifications

37
Setting Up the Base
The installation site should offer the best possible GPS recep-
tion conditions. The antenna should have a clear view of the
sky in all directions. There should be no, or a minimum of sat-
ellite obstructions in the vicinity.
1. Set up the tripod / tribrach combination over the point.
2. Screw the RTK vertical antenna extension into the tri-
brach.
3. If you wish to initialize the rover through the “Bar” initial-
ization method, insert the kinematic bar on top of the RTK
vertical antenna extension. If you will be using the “On
The Fly”, “Static” or “Known Point” initialization method,
skip step 3.
4. Attach the GNSS antenna on top of the kinematic bar (for
the “Bar” initialization method), or on top of the RTK ver
-
tical antenna extension (for all other initialization meth-
ods).
5. Mount the license-free radio onto its bracket using the
screws, nuts and washers provided.
10.
5.
8.
12.
H Slant
H Vertical
6.
5.
2.
3.
4.
7.
11.
9.
1.
Setup with Kinematic Bar
Setup without the Kinematic Bar